BRITETone® – The Brass & Wind Comprehensive Care & Maintenance Solution for Band & Orchestra Instruments

Musician Favorite – Technician Preferred

  • Conditions and lubricates valves, keys, slides, and hinges
  • Compatible with all valve oils
  • Keeps valve oils fresher and lasting longer between maintenance cycles
  • Prevents stuck mouthpieces, valves and keypads
  • Blocks unhealthy mold and bacteria growth
  • Optimizes metal surfaces for strong, clear projection
  • Reduces friction for extended instrument life
  • Removes dried oil deposits that trap corrosive moisture
  • Lowest cost per application
  • Complies with California “VOC” air quality and all safety regulatory requirements.
  • This is a nontoxic product that is less harmful than methanol alcohol.*

BRITETone® gives winds and other orchestra players a total instrument care maintenance solution with a specialized conditioning formula that lifts away and removes dust and grime from all metal parts, then provides a micro-thin lubricant barrier that facilitates silky-smooth playing response. Valves, *mouthpiece receivers, keys, slides, tubes, and all moving parts react instantly and experience less wear due to reduced friction after the easy one-step application.  BRITETone is compatible with all valve oils and keeps them fresher, longer. Read our report on valve oil compatibility and application.

New Conditioning Technology for Brass and Wind Instruments
BRITETone’s specialized lubricant formula provides a micro-thin lubricant barrier that banishes noise, facilitates silky-smooth playing response, and conditions horns to resist pitting, corrosion, and oxidation. BRITETone gives brass and metal surfaces an attractive finish, but will not act as a polish or stripper that can damage fine finishes of brass instruments. Once applied, the formula will not migrate or build up, and is safe and gentle for fine wood and metal surfaces.

Added Protection Against Harmful Bacteria, Fungus, and Viruses
Varying climate and humidity conditions can reek havoc with sensitive band and orchestral instruments, leading to moisture and condensation that give rise to harmful bacteria, fungus, and viruses. Regular application of BRITETone® effectively eliminates the threat of harmful microbial buildup from both high and low pH contaminants including saliva, smoke, sweat, and the condensation that occurs when instruments are taken outside and back inside a playing venue. Read our in-depth report on BRITETone’s anti-microbial properties.

Essential Horn Player’s Gear
BRITETone’s conditioning and lubricant formula optimizes the maintenance of brass, winds, and other orchestral instruments where clear, noise-free performance is all-important. Annoying friction, sticky or sluggish response from your instrument can inhibit your creative flow–BRITETone takes care of all these potential problems in an easy one-step process. Formulated for use on high-precision instruments, BRITETone excels on conditioning metal surfaces including brass, nickel, chrome, and silver. Use BRITETone to make sure that your horn puts out punchy, articulate tone every gig: ensure that BRITETone Dry Lube in your road case. Three sizes are ideal for use in the shop, touring, or in the studio.

BRITETone® – Uniquely Effective, Environmentally responsible
BRITETone’s non-toxic formula is made expressly for use on all metal parts and surfaces of horns and other band & orchestra instruments. BRITETone’s micro films are less toxic than conventional mineral oils and other petroleum based oil lubricants and conditioners. And our dry-to-the-touch films do not migrate or transfer on contact unlike silicone and Teflon. The proprietary formulation is the culmination of years of research and development in flex-film technologies, and has been a cornerstone of private label products since 1986.

*Special note regarding use on brass and woodwinds.
 The mouthpiece should first be cleaned and sterilized using conventional methods prior to applying BRITETone.  Apply BRITETone® to mouthpiece receiver and shank as a post-cleaning preventative measure. Also apply internally to the throat and backbore to prevent buildup of hard scale deposits. Allow 15-20 seconds to dry thoroughly.  Clean the mouthpiece rim off with medical grade denatured alcohol or preferred antiseptic after reinsertion.  When applied to the mouthpiece some of the microfilm may be accidentally transferred to the mouth contact area during reassembly. We do not recommend leaving our microfilm on the mouth contact area of the mouthpiece although Sound Synergies micro films are inert and non-toxic when dry.  They will not migrate or back-flush when dry. They can be totally removed with dish detergent and warm water (plain water or saliva will not remove BRITETone’s hydrophobic micro film).

Available in Aerosol and Liquid Trigger Spray
Sound Synergies aerosol products come standard with wide-angle spray cap and 5-inch extension straw for hard to reach areas. Our adjustable trigger sprayers are constructed of durable high-impact plastic and spun aluminum bottles. All rubber plugs and gaskets are made from rugged, long lasting Viton® (fluorocarbon rubber) which has excellent resistance to high temperatures, ozone, oxygen, mineral oil, synthetic hydraulic fluids, fuels, aromatics and many organic solvents and chemicals.  Click here for liquid trigger sprayer assembly instructions.

More information: